Sewing Instructions – Model 279 Kids' Shirt (Supplement 336)
Children's sizes – how to choose the right pattern
- Measure the child's chest at its fullest point.
- Find the measurement in the chart – it shows which age it normally corresponds to.
- Choose the pattern by the child's size and shape, not just by age.
| Age (years) | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Chest measurement in cm | 54 | 56 | 58 | 60 | 62 | 64 | 66 | 68 | 70 | 72 | 74 | 76 |
| Chest measurement in inches | 21¼″ | 22″ | 22⅞″ | 23⅝″ | 24⅜″ | 25¼″ | 26″ | 26¾″ | 27½″ | 28⅜″ | 29⅛″ | 30″ |
Choose children's models and patterns according to size and shape, not just age. For example, if a 7-year-old child is the same shape and size as a 10-year-old, then pick the pattern for 8 – 12 year-olds. Check the paper pattern for correct fit before cutting the fabric! Match the length to the height of the child. For those with a very tall physique, lengthen the pattern pieces accordingly, and for those who are shorter, shorten them accordingly. The amount of fabric given as a guideline under each model is calculated for someone of average height.
SPACE FOR SEAMS AND HEMS NEEDS TO BE ADDED.
Have fun making up your own patterns!
Supplement No. 336 – Model 279 Kids' Shirt (SHIRT) ★★ A relaxed knit shirt for ages 2–5 with drop shoulders, contrasting turn-up cuffs and a hidden neckband. Draft the pattern with the Lutterloh System from the child's bust (chest) measurement, then add seam allowances before cutting.
Back to Supplement No. 336 · Matching pants (Model 279)
To keep a PDF: use your browser's Print → Save as PDF.
What you need
| Item | Amount |
|---|---|
| Knit fabric for the shirt | 60 x 120 cm – ⅔ yd of 48″ wide fabric |
| Contrast knit for the cuffs (EF) | 45 x 7 cm – 18 x 2¾″ |
| Matching cotton-spandex jersey for the neckband | a strip approx. 15 x 2⅜″ (37 x 6 cm) |
| Ballpoint / jersey needle | for your sewing machine |
| Thread | 1–2 spools, matching |
Fabric recommendation: medium-weight knits
- French terry (7.1–8.3 oz/yd²)
- Interlock knit (6.2–7.7 oz/yd²)
- Sturdy cotton-spandex jersey (5.9–6.8 oz/yd²)
For the cuffs (contrasting color): the same knits as above, or a fine rib knit (cuffing fabric). For the hidden neckband (tone-on-tone): cotton-spandex jersey (5.9–6.8 oz/yd²).
Fabric suggestion: Yellow Organic French Terry, e.g. from KnitFabric.com.
Pattern pieces and cutting
Add ⅝″ (1.5 cm) seam allowance on all seams and 1¼″ (3 cm) at the hem, unless your drafted pattern already includes them.
| Piece | Cut |
|---|---|
| Front (A) | 1 on the fold |
| Back (B) | 1 on the fold |
| Sleeve (E) | 2 |
| Cuff (EF) | 2, contrast fabric (see step 8) |
| Neckband (ST) | 1 strip on the crossgrain (see step 2) |
Sewing steps
Note: Unlike the dress (Model 280), this shirt is drafted from the bust measurement only. The waistline has no drafting points and serves only as a proportional guide; the width at the hem comes from the A-line side seams. Sew with a stretch stitch (narrow zigzag, lightning stitch or serger).
- Shoulder seams. Place the front (A) right sides together on the back (B), pin and stitch the shoulder seams. Trim the seam allowances in half, finish them together and press them toward the back.
- Calculate the neckband. The neckband must be shorter than the neckline. Measure the neckline and multiply by 0.85. Example: 16″ (40 cm) × 0.85 = 13⅝″ (34 cm), plus 1¼″ (3 cm) seam allowance (2 × ⅝″ / 1.5 cm) = 14⅞″ (37 cm) total length. Cut the strip on the crossgrain (selvage to selvage, in the direction of greatest stretch). A cutting width of 2⅜″ (6 cm) gives a finished ¾″ (2 cm) inner neckband; the seam allowances are already included. Mark the measurements directly on the fabric. If the fabric is folded, cut half the length starting from the fold.
- Prepare the neckband. Stitch the short ends right sides together to form a ring, trim the seam allowances and press them open. Fold the band in half lengthwise, wrong sides together, and press the fold. To divide it into quarters, fold the ring in half and mark the seam and the opposite fold with pins; then fold again so these pins meet and mark the new folds.
- Prepare the neckline. If the shirt was cut with ⅝″ (1.5 cm) seam allowance all around, trim the neckline allowance to ⅜″ (1 cm), or cut it with ⅜″ (1 cm) from the start. The neckband seam allowance is also ⅜″ (1 cm). Divide the neckline into quarters: pin the center front and center back notches, fold the shirt so both pins meet and mark the new folds. Note: these side marks usually don't sit on the shoulder seams but slightly toward the front.
- Insert the hidden neckband. Slide the neckband over the neckline, right sides together, with all raw edges at the top. Match the quarter marks, placing the band seam at the center back or at a side mark. The shirt fabric will bunch slightly between the pins because the band is shorter. Sew with a narrow zigzag (width 1.0 / length 2.0), stretching only the neckband to fit – never the shirt fabric. Check for puckers and correct any. Wrap the band completely over the seam allowances to the inside so it encloses them, pin or baste, and press the neckline carefully. Topstitch flat from the right side with a decorative stretch stitch, zigzag, twin needle or coverstitch.
- Sleeves. Knit sleeves are set in flat, before the underarm and side seams are sewn. Lay the shirt out flat, right side up. Place the sleeve right sides together on the armhole: pin the sleeve center mark to the shoulder seam, then pin the front sleeve cap evenly to the front armhole (front notch "F" / "V"), then the back. Stitch, trim the seam allowances to ⅜″ (1 cm), finish them together and press gently toward the sleeve.
- Underarm and side seams. Fold the shirt right sides together and pin the side seams and, continuously, the underarm seams, matching hem marks, waist notches and the underarm seams exactly. Turn the seam allowances at the underarm in opposite directions. Because of the drop shoulder, the sleeve meets the side seam at a distinct corner rather than a curve: stitch exactly to the corner, leave the needle down, lift the foot, pivot, lower the foot and finish the seam. Clip into the seam allowance at the deepest point of the corner to about 1/16″ (2 mm) from the stitching so the underarm lies flat. Trim the seam allowances in half, finish them together and press toward the back.
- Turn-up cuffs (EF). The cutting width is fixed: 2″ (5 cm) + 1¼″ (3 cm) seam allowance = 3¼″ (8 cm), giving a finished width of 1″ (2.5 cm). Cutting length = sleeve hem circumference + 1¼″ (3 cm) seam allowance (the pattern value of approx. 7″ / 18 cm is typical for a relaxed sleeve at this age). Sew the short ends right sides together to form a ring, trim and press the seam open. Fold in half lengthwise, wrong sides together, and press lightly. Turn the shirt right side out, slide the cuff inside the sleeve with its seam matching the underarm seam, distribute the width evenly and pin from the sleeve side. Stitch inside the sleeve along the cuff, trim the seam allowances slightly and finish them together. Fold the cuff up to the outside and press – the seam allowance disappears underneath. Secure the cuff at the underarm seam with a few small hand stitches.
- Hem. Finish the lower edge, turn it 1¼″ (3 cm) to the inside and press. From the right side, topstitch approx. 1″ (2.5 cm) from the fold with a zigzag, twin needle or coverstitch, catching the hem allowance on the inside.
Tips
- Classic rib cuffs instead of turn-up cuffs. Since the sleeve is already slightly cropped, you can sew a 1¼–1½″ (3–4 cm) wide rib knit cuff directly to the sleeve hem – check the sleeve length first. Calculate the cuff length like the neckband (sleeve hem circumference × 0.85 + seam allowances).
- Pro tip – seam allowances. ⅝″ (1.5 cm) on all seams is a reliable allowance, even on jersey: the fabric rests securely on the feed dogs and isn't pulled down into the needle plate. Simply trim the allowances in half after stitching and finish them together.
- Shirt dress. Model 280 is the dress version with pockets and a rib hem band – see the sewing instructions for Model 280.